High Velocity. High Volume. High Performance!
Art’s Way Miller Pro Forage Blower fills the tallest silos with lower power requirements and a paddle design that generates a powerful air stream. The large hopper increases capacity. |
|
Two models available for maximizing tractor HP.
|
Maximum capacity auger action
-
Auger trough distributor moves the flow of material into the fan housing faster.
-
Large transition opening allows a smoother flow of material into the fan.
-
Large hopper area increase blower capacity and allows easy forage box positioning.
-
12 in. diameter auger feeds forage into the fan at 30 degree angle. Inserts material into the air stream at nearly the same plane as rotation for greater efficiency.
-
Flexible wind guards on hopper sides keep cleanup to a minimum.
-
Auger clutch handle operable from front, side and read of blower.
-
Water hose connection directs nozzle at auger end. A second inlet is positioned through the blower band.
-
Kevlar drive belts last longer and are less susceptible to stretching.
-
Transport wheels are equipped with tapered roller bearings.
|
|
High power blower
-
Blower outlet easily removable for quick inspection and maintenance, without loosening housing band.
-
60 inch diameter impeller housing with heavy eight-paddle fan and rotating back plate that provides non-stop filling and virtually eliminates plugging. Paddles made from 40/50 carbon steel resist wear and corrosion.
-
Sharpened adjustable shear bar keeps paddle tips clean. Prevents hair-pinning, carry-over and power loss. All material goes up the pipe.
-
Reversible housing band.
|
|
Power Paddle design
Engineering tests show that 35 degree paddle angle generates a greater air stream, moving more material with less power.
|
|
Standard features
-
Large hopper intake area
-
Auger trough distributor
-
Large transition opening
-
Heavy 8-paddle fan with power paddle design
-
Sharpened shear bar
-
Heavy PTO drive line
|
|
Optional 1000 RPM Blower
Now available for use with larger HP tractors with 1000 RPM PTO shafts.Requires minimum 140 PTO HP tractor.
|
1 3/8 in. 21 spline
1 3/4 in. 20 spline (opt) |
|
Forage Blower Specifications
|
Housing diameter 60 in.
Blower housing width 9 in.
Number of paddles 8
Blower outlet size (pipe flange) 9 in. |
|
Operating speed
-
540 RPM 540-600 RPM
-
1000 RPM 975 to 1010 RPM
|
|
Tip speed
-
@ 540 RPM 8640 RPM
-
@1000 RPM 10400 RPM
|
|
Minimum HP – 1000 RPM 140 HP
Hopper auger size 12 in.
Hopper height from ground
-
without wheels 67 in.
-
with wheels 74 in.
|
|
Weight (approx.)
-
540 RPM 1580 lbs.
-
1000 RPM 1900 lbs.
|
|
Wheels & tires 4.80 x 8 |
