New Holland Compact Wheel Loaders - W80C HS
|
CAB HEIGHT IN (MM) 106” (2680) WHEELBASE IN (MM) 88” (2225) | |
COMFORT AND PERFORMANCEBoth W50C and W80C are here to provide comfort at work and let you reduce downtime. A spacious cab incorporates a standard LCD display and natural, ergonomic controls. | |
HIGH VERSATILITYThe choice of one or two auxiliary hydraulic circuits and the availability of high flow in combination with creep speed allows work to be done at max flow at a constantly low forward pace. | |
SUPERIOR PERFORMANCEThe weight distribution enables the new compact wheel loader to fully benefit from its impressive improved lifting capacity. | |
HIGH PRECISIONThe inch and brake pedal progressively disengages the transmission in the decelerating phase while progressively engaging the brakes, giving the operator millimetric control of the machine at low speeds. |
CLEAN, POWERFUL ENGINESStep up into the superb BRAUD 9090X Olive cab. You will find it has been designed to fit you perfectly. The cab is fully suspended and sound-proofed for a smoother, more comfortable drive. Pressurized, heated and air-conditioned, the cabs are designed to offer optimum comfort and protection during harvest, spraying and other operations. Noise levels have been reduced by 3 dBA compared to the previous harvesters when compared in like conditions. A seat belt, safety glass breaking hammer and electronic operator presence sensor are standard fittings. A fire extinguisher is available.The entire range boasts 3.4 liter Common Rail F5H engines developed by FPT Industrial that comply with the stringent Stage V emissions regulations. Advanced Common Rail technology delivers precise fuelling for optimal response and has also reduced fuel consumption significantly compared to previous models. This super-quiet engine develops up to 75 hp and up to 314 Nm of torque for guaranteed productivity and operator comfort. The entire range uses Diesel Oxidation Catalyst (DOC) Diesel Particulate Filter (DPF) technology for Stage V compliance, which is maintenance-free and further enhances efficiency to reduce total cost of ownership. |
POWERED BY FPT INDUSTRIAL
|
DOC & DPF : INTEGRATED EMISSION TECHNOLOGY |
COMMON RAIL. COMMON SENSE. |
LONG SERVICE INTERVALS |
SUPERIOR COMFORT AND SAFETY.Almost unobstructed 360-degree vision is offered by the newly designed cab. The elevated driving position and an abundance of curved glass within four narrow pillars ensure the best view of any materials handler on the market. Access via the wide-opening glass door is easy and straightforward, operators will appreciate the bright airy space and fully opening side window and low noise levels of 71dB(A). Further comforts include 10 air vents, air conditioning, air suspended seat, tilting and telescopic steering column and many useful storage compartments. |
DESIGNED TO SAVE TIME
|
DELUXE CAB FOR DEMANDING OPERATORS
|
SUPERIOR CAB SAFETY
|
|
Cab height in (mm) |
106” (2680) |
|
Wheelbase in (mm) |
88” (2225) |
|
Ground clearance under shaft in (mm) |
19” (493) |
|
Ground clearance under axles in (mm) |
15” (370) |
|
Angle of departure in (mm) |
32° |
|
Overall width without bucket in (mm) |
73” (1860) |
|
Tread width in (mm) |
59” (1500) |
|
Operating height - fully raised with spillguard in (mm) |
169” (4322) |
|
Hinge pin height - fully raised in (mm) |
132” (3395) |
|
Overall length - bucket level on ground in (mm) |
222” (5684) |
|
Dump height - fully raised, 45° dump in (mm) |
105” (2687) |
|
Bucket reach - fully raised, 45° dump in (mm) |
33” (845) |
|
Bucket reach - 7 ft 0 (2.13m), 45° dump in (mm) |
52” (1323) |
|
Dig Depth in (mm) |
3” (84) |
|
Turning radius: outside in (mm) |
157” (3987) |
|
Turning angle: Total angle degrees |
80 |
|
Turning angle: From center degrees |
40 |
|
Turning angle: Rear axle oscillation, total degrees |
20 |
|
Voltage volts |
12 |
|
Alternator amps |
120 |
|
Batteries |
95 AHR, 900 CCA |
|
Pump (steering/implement) |
Open-centered pressure/flow compensated. Fixed gear pump |
|
Loader control valve |
Open-center, Hydraulic Loader Control with single lever includes: Forward/Neutral/Reverse switch, Floating switch, Low/High Travel mode switch, Auxiliary Function Roller |
|
Loader auxiliary steering |
Hydraulic orbital center-pivot articulating w/on-demand oil flow |
|
Filtration |
15-micron, full flow replaceable cartridges on return line |
|
Flow at 2500 rpm gpm (lpm) |
22 (85) |
|
Main relief pressure psi (bar) |
3335 (230) |
|
Pump |
Additional HF pump |
|
Flow at 2500 rpm gpm (lpm) |
34 (130) |
|
Pressure psi (bar) |
2900 (200) |
|
Lift cylinder(s) |
two |
|
Bore diameter in (mm) |
3 (84) |
|
Rod diameter in (mm) |
2 (51) |
|
Stroke in (mm) |
30 (751) |
|
Dump cylinder: Bore diameter in (mm) |
3 (89) |
|
Dump cylinder: Rod diameter in (mm) |
2 (57) |
|
Dump cylinder: Stroke in (mm) |
20 (507) COMPACT WHEEL LOADER SPECIFICATIONS 09 GHKLMNCBJDAFE |
|
Model |
F5HFL463A*F004 |
|
Type |
4-stroke |
|
Cylinders |
4 cylinders |
|
Fuel injection |
High pressure common rail injection |
|
Fuel |
Diesel |
|
Fuel Filter |
Replaceable, full flow |
|
Air filter |
Dry type element w/ warning restriction indicator |
|
Radiator Core type |
Staggered |
|
Fan |
Direct drive |
|
Lubrication/cooling oil pump |
Integral |
|
Engine oil |
SAE 10W40 CJ-4 Diesel SAE 0W40 CJ-4 Diesel |
|
Pump |
Deep sump plate cooler with pressurized under-piston nozzles |
|
Bore in. (mm) |
3.898 (99) |
|
Stroke in. (mm) |
4.33 (110) |
|
Displacement liters |
3.4 |
|
Pump operating angles: Side-to-side degrees |
Rated 35 |
|
Pump operating angles: Fore and aft degrees |
Rated 35 |
|
Pump operating angles: Oil filtration |
Replaceable, full flow |
|
Engine speed: Rated speed, full load rpm |
2500 |
|
Engine speed: Low idle rpm |
950 |
|
Engine speed: High idle, no load rpm |
2500 |
|
Horsepower @ 2500 rpm Gross hp (kW) |
74 (55) |
|
Horsepower @ 2500 rpm Net hp (kW) |
70 (52) |
|
Peak torque @ 1400 rpm Gross lb. ft. (N·m) |
233 (316) |
|
Peak torque @ 1400 rpm Net lb. ft. (N·m) |
227 (308) |
|
Transmission |
Hydrostatic transmission |
|
Planetaries |
Outboard |
|
Pump relief psi (kPa) |
6 (42) |
|
Pump flow @ 2500 rpm gpm (L/min) |
37 (140) |
|
Differential |
Open Diff or LSD or 100% Diff Lock |
|
Differential ratio |
3.67 |
|
Planetary ratio |
6 |
|
Final axle ratio |
22 |
|
1st ratio |
2.75 |
|
2nd ratio |
1.163 |
|
Service brakes |
Single pedal. Not assisted, Hydraulic Brake pump with control of the “Inching” function. Auto refill system with auxiliary fluid tank. Caliper on front axle |
|
Parking brake |
Mechanical control lever, Single dry disk on input of the front axle, Mechanical Caliper with no auto wear adjustment |
|
Turtle - Forward mph (km/h) |
3 (5) |
|
Turtle - Reverse mph (km/h) |
3 (5) |
|
Rabbit - Forward mph (km/h) |
9 (14) |
|
Rabbit - Reverse mph (km/h) |
9 (14) |
|
High speed - Turtle - Forward mph (km/h) |
3 (5) |
|
High speed - Turtle - Reverse mph (km/h) |
3 (5) |
|
High speed - Rabbit - Forward mph (km/h) |
21 (33) |
|
High speed - Rabbit - Reverse mph (km/h) |
21 (33) |
|
Fuel tank gal. (l) |
23 (87) |
|
Total gal. (l) |
15 (57) |
|
Reservoir gal. (l) |
11 (40) |
|
Front Axle gal. (l) |
2 (9) |
|
Rear Axle gal. (l) |
3 (12) |
|
Engine oil w/ filter gal. (l) |
2 (7) |
|
Cooling gal. (l) |
3 (13) |
|
Reference configuration |
Unit Equipped with ROPS/FOPS cab with heater, standard counterweight, front and rear fenders, full fuel, 165 (75 kg) operator |
|
Reference tires |
365/80 R20 Dunlop Tires |
|
Reference bucket |
1.4 yd³ (1.0 m³) general purpose bucket w/ Bolt-on-Edge |
|
Operating weights lb. (kg) |
13,184 (5980) |
|
With optional counterweight lb. (kg) |
13,514 (6130) |
|
Fork weight with V type Coupler lb. (kg) |
761 (345) |
|
Forks length in. (mm) |
47 (1200) |
|
Fork load center in. (mm) |
20 (500) |
|
Max height below forks in. (mm) |
128 (3239) |
|
Ground-Fork Clearance @ max Reach in. (mm) |
55 (1398) |
|
Payload (80% of FTTL - EN 474-3) lb. (kg) |
5011 (2273) |
|
Tipping load - straight lb. (kg) |
7372 (3344) |
|
Tipping load - 40° turn lb. (kg) |
6266 (2842) |
|
Payload (80% of FTTL - EN 474-3) w/ add cwt lb. (kg) |
5344 (2424) |
|
Tipping load with add cwt- straight lb. (kg) |
7950 (3606) |
|
Tipping load with add cwt - 40° turn lb. (kg) |
6680 (3030) |
|
Dump angle - fully raised degrees |
45 |
|
Max. rollback: Ground degrees |
40 |
|
Max. rollback: Carry Position degrees |
45 |
|
Max. rollback: @ Maximum reach degrees |
55 |
|
Max. rollback: @ Full height degrees |
55 |
|
Maximum back dragging angle degrees |
61 |
|
ISO bucket capacity - Struck yd3 (m3) |
1.2 (0.8) |
|
Heaped yd3 (m3) |
1.4 (1.0) |
|
Bucket width - outside in. (mm) |
82 (2100) |
|
Bucket weight (incl. Coupler and components) lb. (kg) |
926 (420) |
|
Operating load - ISO lb. (kg) |
3962 (1797) |
|
Maximum material density - ISO lb/yd³ (kg/m3) |
3029 (1797) |
|
Tipping load - ISO: Straight lb. (kg) |
9517 (4317) |
|
Tipping load - ISO: 40° turn lb. (kg) |
7921 (3593) |
|
Tipping load - ISO: Straight with add cwt |
10,031 (4550) |
|
Tipping load - ISO: 40° turn with add cwt |
8510 (3860) |
|
Operating load with add cwt - ISO |
4006 (1817) |
|
Maximum material density with add cwt - ISO |
3147 (1867) |
|
Lift Capacity: Full height lb. (kg) |
8424 (3821) |
|
Lift Capacity: Maximum reach lb. (kg) |
10,644 (4828) |
|
Lift Capacity: Ground lb. (kg) |
13,746 (6235) |
|
Breakout force with tilt cylinder lbf. (kgF) |
13,927 (6317) |
|
Loader clearance circle in. (mm) |
362 (9294) |
Turn Key Web Solutions - Privacy Policy - All Items - Dealer Performance Login