Cab height in (mm)
|
106” (2680)
|
Wheelbase in (mm)
|
88” (2225)
|
Ground clearance under shaft in (mm)
|
19” (493)
|
Ground clearance under axles in (mm)
|
15” (370)
|
Angle of departure in (mm)
|
32°
|
Overall width without bucket in (mm)
|
73” (1860)
|
Tread width in (mm)
|
59” (1500)
|
Operating height - fully raised with spillguard in (mm)
|
169” (4322)
|
Hinge pin height - fully raised in (mm)
|
132” (3395)
|
Overall length - bucket level on ground in (mm)
|
222” (5684)
|
Dump height - fully raised, 45° dump in (mm)
|
105” (2687)
|
Bucket reach - fully raised, 45° dump in (mm)
|
33” (845)
|
Bucket reach - 7 ft 0 (2.13m), 45° dump in (mm)
|
52” (1323)
|
Dig Depth in (mm)
|
3” (84)
|
Turning radius: outside in (mm)
|
157” (3987)
|
Turning angle: Total angle degrees
|
80
|
Turning angle: From center degrees
|
40
|
Turning angle: Rear axle oscillation, total degrees
|
20
|
Voltage volts
|
12
|
Alternator amps
|
120
|
Batteries
|
95 AHR, 900 CCA
|
Pump (steering/implement)
|
Open-centered pressure/flow compensated. Fixed gear pump
|
Loader control valve
|
Open-center, Hydraulic Loader Control with single lever includes: Forward/Neutral/Reverse switch, Floating switch, Low/High Travel mode switch, Auxiliary Function Roller
|
Loader auxiliary steering
|
Hydraulic orbital center-pivot articulating w/on-demand oil flow
|
Filtration
|
15-micron, full flow replaceable cartridges on return line
|
Flow at 2500 rpm gpm (lpm)
|
22 (85)
|
Main relief pressure psi (bar)
|
3335 (230)
|
Pump
|
Additional HF pump
|
Flow at 2500 rpm gpm (lpm)
|
34 (130)
|
Pressure psi (bar)
|
2900 (200)
|
Lift cylinder(s)
|
two
|
Bore diameter in (mm)
|
3 (84)
|
Rod diameter in (mm)
|
2 (51)
|
Stroke in (mm)
|
30 (751)
|
Dump cylinder: Bore diameter in (mm)
|
3 (89)
|
Dump cylinder: Rod diameter in (mm)
|
2 (57)
|
Dump cylinder: Stroke in (mm)
|
20 (507) COMPACT WHEEL LOADER SPECIFICATIONS 09 GHKLMNCBJDAFE
|
Model
|
F5HFL463A*F004
|
Type
|
4-stroke
|
Cylinders
|
4 cylinders
|
Fuel injection
|
High pressure common rail injection
|
Fuel
|
Diesel
|
Fuel Filter
|
Replaceable, full flow
|
Air filter
|
Dry type element w/ warning restriction indicator
|
Radiator Core type
|
Staggered
|
Fan
|
Direct drive
|
Lubrication/cooling oil pump
|
Integral
|
Engine oil
|
SAE 10W40 CJ-4 Diesel SAE 0W40 CJ-4 Diesel
|
Pump
|
Deep sump plate cooler with pressurized under-piston nozzles
|
Bore in. (mm)
|
3.898 (99)
|
Stroke in. (mm)
|
4.33 (110)
|
Displacement liters
|
3.4
|
Pump operating angles: Side-to-side degrees
|
Rated 35
|
Pump operating angles: Fore and aft degrees
|
Rated 35
|
Pump operating angles: Oil filtration
|
Replaceable, full flow
|
Engine speed: Rated speed, full load rpm
|
2500
|
Engine speed: Low idle rpm
|
950
|
Engine speed: High idle, no load rpm
|
2500
|
Horsepower @ 2500 rpm Gross hp (kW)
|
74 (55)
|
Horsepower @ 2500 rpm Net hp (kW)
|
70 (52)
|
Peak torque @ 1400 rpm Gross lb. ft. (N·m)
|
233 (316)
|
Peak torque @ 1400 rpm Net lb. ft. (N·m)
|
227 (308)
|
Transmission
|
Hydrostatic transmission
|
Planetaries
|
Outboard
|
Pump relief psi (kPa)
|
6 (42)
|
Pump flow @ 2500 rpm gpm (L/min)
|
37 (140)
|
Differential
|
Open Diff or LSD or 100% Diff Lock
|
Differential ratio
|
3.67
|
Planetary ratio
|
6
|
Final axle ratio
|
22
|
1st ratio
|
2.75
|
2nd ratio
|
1.163
|
Service brakes
|
Single pedal. Not assisted, Hydraulic Brake pump with control of the “Inching” function. Auto refill system with auxiliary fluid tank. Caliper on front axle
|
Parking brake
|
Mechanical control lever, Single dry disk on input of the front axle, Mechanical Caliper with no auto wear adjustment
|
Turtle - Forward mph (km/h)
|
3 (5)
|
Turtle - Reverse mph (km/h)
|
3 (5)
|
Rabbit - Forward mph (km/h)
|
9 (14)
|
Rabbit - Reverse mph (km/h)
|
9 (14)
|
High speed - Turtle - Forward mph (km/h)
|
3 (5)
|
High speed - Turtle - Reverse mph (km/h)
|
3 (5)
|
High speed - Rabbit - Forward mph (km/h)
|
21 (33)
|
High speed - Rabbit - Reverse mph (km/h)
|
21 (33)
|
Fuel tank gal. (l)
|
23 (87)
|
Total gal. (l)
|
15 (57)
|
Reservoir gal. (l)
|
11 (40)
|
Front Axle gal. (l)
|
2 (9)
|
Rear Axle gal. (l)
|
3 (12)
|
Engine oil w/ filter gal. (l)
|
2 (7)
|
Cooling gal. (l)
|
3 (13)
|
Reference configuration
|
Unit Equipped with ROPS/FOPS cab with heater, standard counterweight, front and rear fenders, full fuel, 165 (75 kg) operator
|
Reference tires
|
365/80 R20 Dunlop Tires
|
Reference bucket
|
1.4 yd³ (1.0 m³) general purpose bucket w/ Bolt-on-Edge
|
Operating weights lb. (kg)
|
13,184 (5980)
|
With optional counterweight lb. (kg)
|
13,514 (6130)
|
Fork weight with V type Coupler lb. (kg)
|
761 (345)
|
Forks length in. (mm)
|
47 (1200)
|
Fork load center in. (mm)
|
20 (500)
|
Max height below forks in. (mm)
|
128 (3239)
|
Ground-Fork Clearance @ max Reach in. (mm)
|
55 (1398)
|
Payload (80% of FTTL - EN 474-3) lb. (kg)
|
5011 (2273)
|
Tipping load - straight lb. (kg)
|
7372 (3344)
|
Tipping load - 40° turn lb. (kg)
|
6266 (2842)
|
Payload (80% of FTTL - EN 474-3) w/ add cwt lb. (kg)
|
5344 (2424)
|
Tipping load with add cwt- straight lb. (kg)
|
7950 (3606)
|
Tipping load with add cwt - 40° turn lb. (kg)
|
6680 (3030)
|
Dump angle - fully raised degrees
|
45
|
Max. rollback: Ground degrees
|
40
|
Max. rollback: Carry Position degrees
|
45
|
Max. rollback: @ Maximum reach degrees
|
55
|
Max. rollback: @ Full height degrees
|
55
|
Maximum back dragging angle degrees
|
61
|
ISO bucket capacity - Struck yd3 (m3)
|
1.2 (0.8)
|
Heaped yd3 (m3)
|
1.4 (1.0)
|
Bucket width - outside in. (mm)
|
82 (2100)
|
Bucket weight (incl. Coupler and components) lb. (kg)
|
926 (420)
|
Operating load - ISO lb. (kg)
|
3962 (1797)
|
Maximum material density - ISO lb/yd³ (kg/m3)
|
3029 (1797)
|
Tipping load - ISO: Straight lb. (kg)
|
9517 (4317)
|
Tipping load - ISO: 40° turn lb. (kg)
|
7921 (3593)
|
Tipping load - ISO: Straight with add cwt
|
10,031 (4550)
|
Tipping load - ISO: 40° turn with add cwt
|
8510 (3860)
|
Operating load with add cwt - ISO
|
4006 (1817)
|
Maximum material density with add cwt - ISO
|
3147 (1867)
|
Lift Capacity: Full height lb. (kg)
|
8424 (3821)
|
Lift Capacity: Maximum reach lb. (kg)
|
10,644 (4828)
|
Lift Capacity: Ground lb. (kg)
|
13,746 (6235)
|
Breakout force with tilt cylinder lbf. (kgF)
|
13,927 (6317)
|
Loader clearance circle in. (mm)
|
362 (9294)
|