Landoll 950E TRAVELING TAIL TRAILER BLACK

Specifications

Model	950E	Category Name	Trailers	Year	2024
Sale Type	New	Manufacturer	Landoll	Color	BLACK
Price	Contact for price CAD

Description

MAXIMIZE PAYLOAD AND PROFITABILITY

The 950E Traveling Tail Trailer has 50-ton capacity and three 25,000 lbs axles. It offers tail lengths of 12′ and 15′, and overall lengths of 45′, 48′ and 51′. It includes the same rugged four beam construction and other outstanding features of the 900 E-Series – standard powder coat paint, stable rigid dock arm, 24,000 lbs tail-lifting capacity and a centralized grease system. Landoll is the only trailer manufacturer to offer powder coat paint on large trailer frames.

WHY OWN A 900 E-SERIES

Quick, simple, safe operation and a longer wheelbase that increases payload. A 15′ tail reduces the load angle to a low 11°. Frames are steel shot blasted in preparation for the TGIC polyester powder coat paint finish standard on 900 E-Series trailers. The tail can raise and lift 24,000 lbs up to 57″ dock height. The 900 E-Series trailers are backed by a 5-year structural warranty.

WORK WITH EASE

The low-load tail angle ensures easy clearance for loading low-sitting equipment, providing seamless loading capabilities. The hydraulic control allows for efficient and convenient loading and unloading operations, all managed through a single control point.

FRAME & GENERAL

Capacity*   50 Ton (100,000 lbs.)
Deck Rating   70,000 lbs. in 10′
Estimated Base Weight   19,890 lbs. (51′) +/-3%
Main Frame   Fabricated 100,000 PSI Yield 4-Beam Design
Crossmembers   4″ Junior I-Beam and 3″ Junior I-Beam on 8″ Centers
Slope Drop   90°
Parking Stands   Jost Two Speed Landing Gear
Pin Setting   18″
Swing Clearance   84″
Hitch   Fifth-Wheel Kingpin
Deck Width   102″
Loaded Deck Height   38″
Loaded Ground Clearance   20″
Decking   1-3/8″ Apitong Hardwood (Lower Deck)
Tool Box   Twin Upper Deck Mounted Top-Opening with Non-Weight Bearing Lid Illuminated
Tie Downs   Double Key Hole Chain Slots / Square Stake Pockets on 16″ Centers / (6) Double Keyhole Chain Slots on Tail / (2) D-Rings Lower Deck at Slope
Tail Lifting Capacity   24,000 lbs.
Load Angle   11° with 15′ Tail
Features   Automatic Slack Adjusters, Flat Approach Plate, Apitong Wood Covered Tail, Center Deck Keyholes on Tail, Bolt-On Traction Plate Over Approach Plate

SUSPENSION & UNDERCARRIAGE

Suspension   Neway Air Ride RLU228, 22,500 lbs. Capacity with Manual Dump Valve
Undercarriage   Centralized Grease System
Axles   (3) 25,000 lbs. Axles, Dual Tire, Oil Bath Bearings, Outboard Brake Drum, Automatic Slack Adjusters
Axles Prepped for Air Inflation
Brakes   12.25 x 7.5 Full Air / Spring Brakes ABS 4S2M, Center Axle Indirect
Tires   235/75R 17.5 LRJ Double Coin
Rims   17.5 x 6.75 Tubeless
Wheels   Steel Hub Pilot
Oil Seal Hubs   Internal Mated Assembly

HYDRAULICS

Hydraulic Hook Up   Quick Couplers / 2,500 PSI – 20 GPM at Controls, 50 GPM Max
Hydraulic Winch   Upper Deck 12,000 lbs. Worm Gear with 85′ of 1/2″ Cable with Wear Plate
Hydraulic Valve Body   Rexroth

ELECTRICAL

Air / Electrical   7 Way Receptacle
Lights   Grote MicroNova LED Clear Lens-Enhanced Stop, Tail & Turn; Rear Amber Strobe-10 Year Warranty
Wiring Harness   Grote “Xtreme” Wiring Harness (7-year warranty)

FINISH & COLOR

Finish   Steel Grit Shot Blast to Bright Metal
Color   Zinc Rich Primer
Powder Coat Color   White, Black, Yellow, Blue, Red, Green, Metallic Gray, Sapphire Blue
Decals   Hi-Visibility Reflective Package

SPECS