Overall operating height with foundry/excavating bucket short lip in (mm)
|
161.3 (4096)
|
Overall operating height with low profile/standard lip bucket in (mm)
|
165.3 (4199)
|
Overall operating height with low profile extended/long lip bucket in (mm)
|
170.4 (4327)
|
Bucket hinge pin in (mm)
|
131.1 (3327)
|
Top of ROPS in (mm)
|
80.4 (2042)
|
Bottom of level bucket, fully raised in (mm)
|
124.2 (3155)
|
Overall length without attachment with coupler in (mm)
|
118.9 (3021)
|
Overall length with foundry excavation bucket on ground in (mm)
|
144 (3659)
|
Overall length with low profile bucket in (mm)
|
148 (3760)
|
Overall length with low profile extended bucket in (mm)
|
153.2 (3891)
|
Dump angle degrees
|
48
|
Dump height with foundry/excavating bucket short lip in (mm)
|
104.5 (2655) @ 45°
|
Dump height with low profile/standard lip bucket in (mm)
|
101.6 (2581) @ 45°
|
Dump reach (max height) in (mm)
|
27.2 (564) @ 45°
|
Bucket on ground degrees
|
33
|
Bucket at full height degrees
|
85
|
Wheelbase in (mm)
|
52 (1322)
|
Ground clearance (bottom of belly pan) in (mm)
|
9.6 (244)
|
Angle of departure degrees
|
27
|
Clearance circle without bucket in (mm)
|
56.2 (1428)
|
Clearance circle with 60” inch foundry bucket in carry position in (mm)
|
84.8 (2155) with 78” bucket
|
Clearance circle with 60” inch low profile bucket on ground in (mm)
|
88.4 (2246) with 78” bucket
|
Clearance circle with 60” inch extended low profile on ground in (mm)
|
93 (2363) with 78” bucket
|
Clearance circle rear in (mm
|
71.2 (1809)
|
Rear axle to bumper in (mm)
|
42.4 (1078)
|
Tread width in (mm)
|
62.2 (1580) with 14” x 17.5” tires
|
Overall width in (mm)
|
76 (1930)
|
Manufacturer/model
|
FPT / F5BFL413E*B002
|
Type
|
Diesel 4-stroke, Turbo, D.I.
|
Cylinder
|
4
|
Bore/stroke in (mm)
|
3.9 x 4.3 (99 x 110)
|
Displacement in3 (L)
|
207.5 (3.4)
|
Fuel injection
|
HPCR Direct
|
Fuel
|
#2 diesel
|
Fuel filter
|
Pre-filter 99.8% @ 30 microns Main filter 95% @ 4 microns
|
Cooling
|
Liquid
|
Air intake
|
Turbocharged Aftercooled with external EGR and SCR
|
High idle - no load rpm
|
2500 +/- 25
|
Rated - full load rpm
|
2500
|
Low idle rpm
|
1150 +/- 25
|
Gross hp (kW)
|
90 (67) @ 2500 rpm
|
Net hp (kW)
|
84 (63) @ 2500 rpm
|
Peak torque lb-ft (N•m)
|
282 (383) @ 1400 rpm
|
Pump to engine ratio
|
1:1
|
Displacement in3 (cc)
|
2.07 (34))
|
Flow gpm (Lpm)
|
29.4 (111)
|
Charge pressure psi (bar)
|
360 (24.5 )
|
System relief psi (bar)
|
5220 (360)
|
Control
|
Mechanical servo
|
Pump to engine ratio
|
1:1
|
Displacement in3 (cc)
|
2.75 (45)
|
Flow gpm (Lpm)
|
24.2 (91.5)
|
Charge pressure psi (bar)
|
362 (25)
|
System relief psi (bar)
|
5220 (360)
|
Control
|
Electro hydraulic
|
Max displacement in3 (cc)
|
28.7 (470)
|
Speed @ high idle engine rpm
|
237
|
Speed @ optional high speed rpm
|
355
|
Torque @ max displ. and relief pressure lb-ft (N•m)
|
1987 (2694)
|
Low range mph (km/h)
|
7.7 (12.4)
|
High range (optional) mph (km/h)
|
11.5 (18.5)
|
Final drive
|
Single-reduction chain drive
|
Size
|
ASA #100
|
Diameter in (mm)
|
2.44 (62)
|
Length in (mm)
|
15.6 (396)
|