Overall operating height with foundry/excavating bucket short lip in (mm)
|
159.7 (4056)
|
Overall operating height with low profile/standard lip bucket in (mm)
|
163.7 (4159)
|
Overall operating height with low profile extended/long lip bucket in (mm)
|
168.8 (4287)
|
Bucket hinge pin in (mm)
|
129.4 (3287)
|
Top of ROPS in (mm)
|
78.8 (2002)
|
Bottom of level bucket, fully raised in (mm)
|
122.6 (3115)
|
Overall length without attachment with coupler in (mm)
|
117.8 (2993)
|
Overall length with foundry excavation bucket on ground in (mm)
|
142.9 (3631)
|
Overall length with low profile bucket in (mm)
|
147 (3734)
|
Overall length with low profile extended bucket in (mm)
|
152.1 (3863)
|
Dump angle degrees
|
55
|
Dump height with foundry/excavating bucket short lip in (mm)
|
103.1 (2618) @ 45°
|
Dump height with low profile/standard lip bucket in (mm)
|
100 (2541) @ 45°
|
Dump reach (max height) in (mm)
|
31.9 (810) @ 45°
|
Bucket on ground degrees
|
34
|
Bucket at full height degrees
|
85
|
Wheelbase in (mm)
|
52 (1322)
|
Ground clearance (bottom of belly pan) in (mm)
|
8 (203)
|
Angle of departure degrees
|
24
|
Clearance circle without bucket in (mm)
|
55.6 (1412)
|
Clearance circle with 60” inch foundry bucket in carry position in (mm)
|
84.0 (2134) with 72” bucket
|
Clearance circle with 60” inch low profile bucket on ground in (mm)
|
87.7 (2228) with 72” bucket
|
Clearance circle with 60” inch extended low profile on ground in (mm)
|
92.3 (2345) with 72” bucket
|
Clearance circle rear in (mm
|
70.4 (1789)
|
Rear axle to bumper in (mm)
|
40.7 (1034)
|
Tread width in (mm)
|
56.9 (1448) with 12” x 16.5” tires
|
Overall width in (mm)
|
69.8 (1773)
|
Manufacturer/model
|
FPT / F5H FL463A*F001
|
Type
|
Diesel 4-stroke, Turbo, D.I.
|
Cylinder
|
4
|
Bore/stroke in (mm)
|
3.9 x 4.3 (99 x 110)
|
Displacement in3 (L)
|
207.5 (3.4)
|
Fuel injection
|
HPCR Direct
|
Fuel
|
#2 diesel
|
Fuel filter
|
Pre-filter spin on @ 30 microns Main-filter spin on @ 4 microns
|
Cooling
|
Liquid
|
Air intake
|
Turbocharged Aftercooled with external EGR
|
High idle - no load rpm
|
2500 +/- 25
|
Rated - full load rpm
|
2500
|
Low idle rpm
|
1150 +/- 25
|
Gross hp (kW)
|
74 (55) @ 2500 rpm
|
Net hp (kW)
|
68 (51) @ 2500 rpm
|
Peak torque lb-ft (N•m)
|
232 (314) @ 1400 rpm
|
Pump to engine ratio
|
1:1
|
Displacement in3 (cc)
|
2.07 (34)
|
Flow gpm (Lpm)
|
29.4 (111)
|
Charge pressure psi (bar)
|
360 (24.5 )
|
System relief psi (bar)
|
5220 (360)
|
Control
|
Mechanical servo
|
Pump to engine ratio
|
1:1
|
Displacement in3 (cc)
|
2.75 (45)
|
Flow gpm (Lpm)
|
24.2 (91.5)
|
Charge pressure psi (bar)
|
362 (25)
|
System relief psi (bar)
|
5220 (360)
|
Control
|
Electro hydraulic
|
Max displacement in3 (cc)
|
28.7 (470)
|
Speed @ high idle engine rpm
|
237
|
Speed @ optional high speed rpm
|
355
|
Torque @ max displ. and relief pressure lb-ft (N•m)
|
1987 (2694)
|
Low range mph (km/h)
|
7.0 (11.3)
|
High range (optional) mph (km/h)
|
10.5 (16.9)
|
Final drive
|
Single-reduction chain drive
|
Size
|
ASA #100
|
Diameter in (mm)
|
2.44 (62)
|
Length in (mm)
|
15.6 (396)
|