Overall operating height with foundry/excavating bucket short lip in (mm)
|
154.3 (3920)
|
Overall operating height with low profile/standard lip bucket in (mm)
|
158.3 (4050)
|
Overall operating height with low profile extended/long lip bucket in (mm)
|
163.2 (4146)
|
Bucket hinge pin in (mm)
|
123 (3124)
|
Top of ROPS in (mm)
|
78.7 (1998)
|
Bottom of level bucket, fully raised in (mm)
|
116.1 (2950)
|
Overall length without attachment with coupler in (mm)
|
105.1 (2669)
|
Overall length with foundry excavation bucket on ground in (mm)
|
129.6 (3292)
|
Overall length with low profile bucket in (mm)
|
133.7 (3397)
|
Overall length with low profile extended bucket in (mm)
|
138.8 (3525)
|
Dump angle degrees
|
40
|
Dump height with foundry/excavating bucket short lip in (mm)
|
98.2 (2495)
|
Dump height with low profile/standard lip bucket in (mm)
|
95.6 (2428)
|
Dump reach (max height) in (mm)
|
20.3 (517)
|
Bucket on ground degrees
|
31
|
Bucket at full height degrees
|
99
|
Wheelbase in (mm)
|
44.4 (1128)
|
Ground clearance (bottom of belly pan) in (mm)
|
8 (203)
|
Angle of departure degrees
|
25
|
Clearance circle without bucket in (mm)
|
50.7 (1289)
|
Clearance circle with 60” inch foundry bucket in carry position in (mm)
|
79.9 (2031)
|
Clearance circle with 60” inch low profile bucket on ground in (mm)
|
83.1 (2112)
|
Clearance circle with 60” inch extended low profile on ground in (mm)
|
87.7 (2228)
|
Clearance circle rear in (mm
|
62.9 (1599)
|
Rear axle to bumper in (mm)
|
36.4 (924)
|
Tread width in (mm)
|
56.9(1448) with 12"x16.5" tires
|
Overall width in (mm)
|
69.1 (1755)
|
Manufacturer/model
|
FPT/F5H FL463
|
Type
|
Diesel 4-stroke, Turbo, D.I.
|
Cylinder
|
4
|
Bore/stroke in (mm)
|
3.9x4.3 (99x110)
|
Displacement in3 (L)
|
207 (3.4)
|
Fuel injection
|
HPCR Direct
|
Fuel
|
#2 diesel
|
Fuel filter
|
Pre-spin on 30 microns Main-spin on 4 microns
|
Cooling
|
Liquid
|
Air intake
|
Turbocharged with external EGR
|
High idle - no load rpm
|
2500 +/-25
|
Rated - full load rpm
|
2500
|
Low idle rpm
|
1150 +/-25
|
Gross hp (kW)
|
74 (55) @2500 rpm
|
Net hp (kW)
|
68 (51) @ 2500 rpm
|
Peak torque lb-ft (N•m)
|
232 (314) @ 1400 rpm
|
Pump to engine ratio
|
1:1
|
Displacement in3 (cc)
|
2.81 (46)
|
Flow gpm (Lpm)
|
29.4 (111)
|
Charge pressure psi (bar)
|
360 +/-10 (24.5 +/-0.5)
|
System relief psi (bar)
|
5220 (360)
|
Control
|
Direct mechanical or electro hydraulic
|
Pump to engine ratio
|
–
|
Displacement in3 (cc)
|
–
|
Flow gpm (Lpm)
|
–
|
Charge pressure psi (bar)
|
–
|
System relief psi (bar)
|
–
|
Control
|
–
|
Max displacement in3 (cc)
|
28.7 (470)
|
Speed @ high idle engine rpm
|
241
|
Speed @ optional high speed rpm
|
355
|
Torque @ max displ. and relief pressure lb-ft (N•m)
|
1987 (2694)
|
Low range mph (km/h)
|
7.8 (12.5)
|
High range (optional) mph (km/h)
|
11.4 (18.3)
|
Final drive
|
Single-reduction chain drive
|
Size
|
ASA #100
|
Diameter in (mm)
|
2.44 (61.9)
|
Length in (mm)
|
15.7 (399)
|
Type
|
Spring applied, hydraulic release multiple disk
|
Engagement
|
Depress on/off brake button on instrument panel, disconnect lapbelt, get off seat, or stop engine
|
Type
|
Gear
|
Displacement standard aux. in3 (cc)
|
2.23 (36.6)
|
Displacement high flow aux. in3 (cc)
|
0.84 (13.8)
|
Pump flow gpm (Lpm)
|
24.2 (91.5)
|
Optional high flow gpm (Lpm)
|
33.2 (125.7)
|
Enhanced high flow gpm (Lpm)
|
–
|