New Holland Tractor Loaders - U80D
|
HORSEPOWER (SAE J1349) - GROSS @ 2,200 RPM, (KW) 74 (55) BASE UNIT LBS (KG) 10,916 (495) | |
PLACE LOADS PRECISELYThe curved-arm loader linkage provided on the U80D tractor loader provides hydraulic bucket leveling for less spillback, as well as excellent reach at maximum dump height for truck loading. The unique reverse-mounted loader arm cylinders give you maximum bucket breakout force and superior dump speed on the bucket. | |
SUPERIOR SCRAPING AND LEVELING PERFORMANCERugged Class II three-point hitch with controllable down pressure provides excellent scraping and leveling performance. | |
SMOOTH DIRECTION CHANGESThe synchromesh transmission with power shuttle gives you smooth control and easy forward-reverse shuttling. | |
OPERATING COMFORTThe large, efficient, flat-deck operator platform provides easy-to-use controls and unobstructed views for outstanding visibility. |
POWERFUL ECONOMYWith 74 gross horsepower of clean power with its Tier 4 Final certified engine, you get responsive power at both bucket and hitch for loading, stacking, scraping and leveling. The U80D meets Tier 4 Final certifications by using a Particular Matter Catalyst (PM-Cat) solution. This solution is based on particulate matter’s continuous passive regeneration of soot by NO2 generated on the DOC: C + NO2 = NO + CO/CO2 |
SMOOTH DIRECTION CHANGESThe smooth synchromesh with power shuttle lets you make smooth direction changes between the four forward and four reverse gears. |
SUPERIOR SCRAPING AND LEVELING PERFORMANCE |
|
Single-lever 5 function control w/ self-leveling and Return-to-Dig |
Standard |
|
Return-to-dig |
Standard |
|
In-line, reverse linkage |
Standard |
|
Dual parallel dump cylinders |
Standard |
|
Clutch disconnect button on loader control and shift levers |
Standard |
|
4-in-1 Bucket - Weight, lbs (kg) |
1451 (658) |
|
4-in-1 Bucket - Heaped, yd³ (m³) |
1.04 (0.80) |
|
Model |
F5HFL463D*F005 |
|
Type |
4-stroke, turbocharged |
|
Cylinders |
4 |
|
Bore x stroke, in (mm) |
3.9 x 4.33 (99 x 110) |
|
Displacement, in³ (L) |
207 (3.4) |
|
Fuel injection |
Direct HPCR (High Pressure Common Rail) |
|
Engine speeds, (rpm) - Rated speed, full load |
2,200 |
|
Engine speeds, (rpm) - Low idle |
900 - 1,000 |
|
Engine speeds, (rpm) - High idle, no load |
2,330 - 2,430 |
|
Horsepower (SAE J1349) - Gross @ 2,200 rpm, (kW) |
74 (55) |
|
Horsepower (SAE J1349) - Net @ 2,200 rpm, (kW) |
68.4 (51) |
|
Maximum torque @ RPM - Gross, lb-ft (Nm) |
233 (316) |
|
Maximum torque @ RPM - Net, lb-ft (Nm) |
219 (298) |
|
Torque rise at rated speed |
35% |
|
Transmission type |
4 speed synchromesh with hydraulically actuated clutches and electric F/R shuttle control, clutch disconnect buttons on the transmission shifter and loader control lever |
|
Torque converter ratio (standard) |
3:1 |
|
Torque converter (PTO ready) |
3.2:1 |
|
Differential-lock |
On the go push-button activation |
|
Service brakes |
Individually applied hydraulically actuated, maintenance-free, self-adjusting outboard mounted wet disc |
|
Parking brakes |
Trans Mounted SAHR (Spring Applied Hydraulic Release) |
|
Travel speeds, mph (km/h)* |
1st, 2nd, 3rd, 4th |
|
Forward/Reverse (standard) |
3.8 (6.1), 6.1 (9.8), 12.8 (20.6), 24 (38.6) |
|
Forward/Reverse (PTO Ready) |
3.5 (5.6), 5.5 (8.9), 11.8 (19), 21.3 (34.3) |
|
Alternator, amps |
120 |
|
Rear |
2/4 WD-17.5 L x 24, 10-ply rating STD, 2/4 WD-19.5 L x 24, 10-ply rating OPT |
|
Fuel tank, gal (L) |
30 (114) |
|
Hydraulic system, gal (L) - Total |
19 (72) |
|
Hydraulic system, gal (L) - Reservoir w/filter |
15.3 (58) |
|
Hydraulic system, gal (L) - Reservoir w/o filter |
14.8 (56) |
|
Rear Axle, qt (L) - Planetaries (each) |
1.6 (1.5) |
|
Engine oil w/filter, qt (L) |
8.5 (8) |
|
Cooling system, qt (L) |
17 (16.1) |
|
Variable flow from 0 to 8 gpm (0 to 30 L/min) |
Standard |
|
485 lbs (220 kg) counterweight included with hitch |
Standard |
|
Hitch position - 1/5 lbs (N) |
3247 (14,444) |
|
Hitch position - 2/5 lbs (N) |
3400 (15,125) |
|
Hitch position - 3/5 lbs (N) |
3501 (15,547) |
|
Hitch position - 4/5 lbs (N) |
3297 (14,666) |
|
Hitch position - Highest point lbs (N) |
2984 (13,274) |
|
Base Unit lbs (kg) |
10,916 (495) |
U80D-Tractor-Loaders-Brochure.pdf
Turn Key Web Solutions - Privacy Policy - All Items - Dealer Performance Login